ANKUSH
here are the steps to perform:-

Logic: the server has a major bug in it, by which it fails to block two simultaneous connections from the phone and establishes a connection with full internet working,

Supported devices: all phones with multichannel gprs support

For connection on your mobile phone:-

1) Make two connections like bsnlportal and BSNLPORTAL1

(names of profile don’t matter, u can keep one as billgates and shahrukhkhan lol..the basic purpose of names is to enable the user to differentiate between the two accounts,)

2) Select the application you got to have the full connection working on.
Surpassingly “web” now just select “bsnlportal” profile and select a link like wap.cellone.in the page will get open, just press the red button such that the “web” application goes in the background.
Make sure that the gprs connection is still established with the web app. Two parallel lines on the top left of the screen will confirm this

3) Now open any other app that requires web connection like opera. Select BSNLPORTAL and open any other link like wap.google.com, u will get error –

the aim of using the other app is to perform multi-channel gprs,
this is verified by seeing some dots on the pre-existing connection established by “web”

(step 2)

“Access denied.

Technical description:
403 Forbidden - You are not allowed to communicate with the requested resource.”

4) close opera and open web and open a site like esato.com

5) if everything is done as said here then esato will load and voila! We have the whole internet!

For connection on pc.

1)create a connection and enter the number to be dialed as *99***1#

2) enter the following string as extra initialization command

3)now dial from pc, the connection will be established

4)pick the phone and open “web” open “wap.cellone.in” the phone shows error .

5) close “web” and then from the browser open www.google.com
and voila! The whole intenet is here

settings for profiles

apn: celloneportal
ip: 192.168.51.163
port : 8080

leave other fields blank as they are of the least concern!

the browser settings on pc too go the same as mentioned above!

ENJOY HACKING

POST COMMENTS[ANKUSH]
Labels: 0 comments | | edit post
ANKUSH
Although I use Airtel and a Beetel 220 BX modem as my basis for this write up, the same rules can be applied to others as well. So lets get started. First thing make sure your DSL modem is on. Fire up your browser. Type http://192.168.1.1 as the address with the following Username/Password - Username : admin Password : password Note : These are case sensitive. Make sure all are typed in lowercase. Click on Advanced Setup -> NAT in the page that loads. If you do not see these options try entering http://192.168.1.1/main.html as the address. Some routers/modems deliberately try to prevent users from accessing these options. On the NAT virtual servers page click the add button. Now add the port number that you wish to open up. You can even open up a range of ports using the add button. You should see something similar to the screenshot below.




This technique can be used for any operating system / modem / service provider. It may vary slightly but the essential principle remains the same.


enjoy hacking.

post comments[ankush]
Labels: 0 comments | | edit post
ANKUSH
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
FIRST TRICK[ANKUSH]
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>


You need a PC or a Laptop and the required connectivity tools ,ie.,
Serial/USB cable OR Infrared Device OR Bluetooth dongle

1) Activate Airtel Live! ( It’s FREE so no probs)

2) Create TWO Airtel gprs data accounts (yep TWO) and select the
FIRST as the active profile.

3) Connect your mobile to the PC (or Laptop) and install the driver for
your mobile’s modem.

4) Create a new dial-up connection using the NEW CONNECTION
WIZARD as follows

Connecting Device : Your mobile’s modem
ISP Name : Airtel (or anything you like)
Phone Number : *99***2# / Try 99***1
Username and Password : blank

5) Configure your browser and download manager to use the proxy
100.1.200.99 and port 8080.( My advice is to use Opera since you
can browse both wap and regular websites)

6) Connect to the dial-up account. You will be connected at 115.2
kbps (but remember, that is a bad joke).

7) Pick up your mobile and try to access any site. You will get “Access
Denied…”(except for Airtel Live!). IT DOES NOT MATTER.
Keep the mobile down.

8 ) On the PC ( or Laptop) open your browser, enter any address ,
press ENTER and…….WAIT

9) After a few seconds the page will start to load and you have the
WHOLE internet at your disposal. *********



>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
SECOND TRICK[ANKUSH]
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>


Under DATA COMM
~~~~~~~~~~~~

APN : airtelfun.com

USERNAME : blank

PASSWORD : blank

PASS REQ : OFF

ALLOW CALLS : AUTOMATIC

IPADDRESS :

DNSADDRESS :

DATA COMP : OFF

HEADER COMP : OFF


Under INTERNET PROFILES
~~~~~~~~~~~~~~~~

INTERNET MODE : HTTP or WAP (both worked for me)

USE PROXY : YES

IP ADDRESS : 100.1.200.99

PORT : 8080

USERNAME :

PASSWORD :

No Risk Here, Try it and Enjoy


>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
THIRD TRICK[ANKUSH]
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>


1st go to settings menu then to connectivity tab now choose the option Data comm. then "DATA ACCOUNTS" go to new account now the settings r as follows
ACCOUNT TYPE:GPRS
NEW ACCOUNT NAME:A1
APN:airtelfun.com
usr name: (blank)
password: (blank)

now save it
NOW!
go to Internet Setting in connectivity here choose intrnet profile--go to new profile setting are as below
NAME:A1
CONNECT USING:A1(which was created in data comm.)
save it
now u would be able to see it now selest it and take "more" option then select setting here in use proxy option it will be selected no if it is no then change it into yes
now go to proxy adress and give the adress as
100.1.200.99 and then the port number as 8080
Usr name:
password:
now save all the settings u made . come back 2 connectivity
choose streaming settings now in connect using option choose a1 that we created leave the use proxy option as no itself
THESE R THE SETTINGS
now access airtellive! from ur activated SE phone goto VIDEO GALLERY OR VIDEO UNLIMITED(varies according to states) choose live streaming then choose CNBC OR AAJTAK WHILE CONNECTING TO MEDIA SERVER cancel AFTER 9 or 10 sec then type any web adress if it shows access denied then once again select CNBC and wait for a few more sec than before if its fully connected also no prob its free then cancel it or if ur connected then stop it and the internet is ready to take of .GOOD LUCK SE AIRTEL USERS

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
FOURTH TRICK[ANKUSH]
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

For All Airtel Users

Requirements:
1. Airtel live (available 4 free)
2. Nokia series60 handset eg 6600,6630,n series,7610,6670 etc
3. Opera wap browser 4 mobile
Procedure:-

1. Go to ur connection settings and make a new internet profile using the default settings of airtel live. name that new profile as nething(for eg masala); change the home page of that profile to nething u like for eg www.google.com.

2. Go to ur Opera browser and set the default connection as AIRTEL LIVE. this is the original settings u received thru airtel.

3. Go to the services(in n6600) and Web(N6630) and change the default profile for connection as masala (newer one).

**Note: always make sure that ur access point is airtelfun.com

Apply:-

1. Open Opera and u will see that homepage of Airtel Live is opened. Minimize the application.

2. Now open web using the duplicate Profile and u will see that two gprs connections will work simultaneously and at the web or the services page it will show "Unable to connect" or any error. well thats the signal of ur success.

3. Simply go on the Opera with web on and open any site u want for free. No Charges No nothing.

U can also use it through ur computer..........

someone said dis too

The main principle behind this is we hav 2 fool the bsnl techies 2 activate portal and thus get gprs activated / get "G" signal on ur cell as bsnl portal (wap.cellone.in) needs "gprs signal on ur cel (whether gprs is formaly activated/registerd or not (by my method )i dont know)

NORMALLY THEY DONT DO THAT INSPITE OF THE FACT THAT THEY SHOULD ACTIVATE GPRS SIGNAL SERVICE FOR PORTAL!!!
AND THEY WILL GIVE U NO OF REASONS----
---THAT portal is message based , so go to cellone icon in menu and use that sms based portal (what the f**k)
---THAT portal service will be activated when u will activate gprs by filling up form and registering at nearest CCN!!
---THAT ur handset has some problems (if u say that "G" signal is not present)
----etc,etc!!

U HAVE 2 ACTIVATE PORTAL FIRST WHICH IS FREE AND U CAN EAT UP CC'S FOR THIS REASON!!
SO WHAT U HAV 2 DO IS--
1) SEND PORTAL to 3733 AND CONFIRMATION SHD COME WITH 5 MIN AT-MAXIMM !!
2) SEND FOR ATLEAST 20-30 TIMES (CAN B ANY MORE THAN THAT)
JUST S**K UP THE NETWORK(3733) WITH THESE MESSAGES !!!
THAT'S FREE NO!! BOTH ON POST AND PRE!!
3) NOW ALONG ALSO SEND 20-40 SMS AS GPRS TO 3733
(NO OF SMS DIRECTLY PROPORTIONAL 2 HATE FOR BSNL AND HOW EARLY U WNAN GET UR GPRS ACTIVATED) this is also free both on post and pre!!
4) U WILL GET CONFIRMATION IN BOTH CASES AND MSG TELLS U 2 GET SETTINGS FROM 9400024365, THE NO OF CC!!
HERE AT MY PLACE I CAN DIAL 9419024365 ALSO!
BOTH R TOLL FREE AND BOTH R LOCATED IN CHANDIGARH!!!
(((((((AND SOME OF THE CC'S SAY they cant give such sensitive information that where they r located, as if thay have a 3 rd world of their own! and the other dumbs said that they r in chandigarh!!!!)))))

I WOULD ADVISE ALL FIRST, 2 call them once 2 get the settings!!
(most of the times that is incorect but gives u an idea of settings in ur area))
Try and in ur 1 st call only,
talk roughly and tell them u r calling 10-20th time just for settings and is that their service!!!
5) Now when u get them save them AND plz post them here!!!
6) now GET ATLEAST 2-3 COMPLAINTS REGISTERED( each after 1 day) THAT UR PORTAL HAS NOT ACTIVATED AND GET THEIR SERIAL NO.
and in the end bombard them abt the status of all those complaints !!
b4 registering ur complaint they will hesitate much and always say taht they will b sendin new settings which r accurate! but dont belive them and just register complaints!!
6)AFTER THAT, u have 2 only wait until "G" signal is there on ur screen!!

LOOK, WHAT I HAVE WRIITEN ABV IS METHOD by which i got activated my "G" service !!! without fillin any form or such and without any money drain!!
may be since it bypasses the formal way of registeration, that is why this trick is working !!!!!!!!!!!!by Ankush.


>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
FIFTH TRICK[ANKUSH]
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>


First open ur msg window and type LIVE and send it to 2567 so that after 5 min u get the setting of Airtel Live or if u have already no need for this procedure.
now then open that setting and copy all the settings from it and create one access point manually which has all the settings like Airtel Live has.
now only one change will be there and it would be in access point name which is "Airtelmms.com" instead of originally "Airtelgprs.com".
ok u've done it just active that setting and access free airtel gprs on ur phone.

enjoy hacking .

post comments[ankush]
Labels: 0 comments | | edit post
ANKUSH

Google is a treasure trove full of important information, especially for the underground world. This Potential fact can also be utilized in the data for the username and password stored on a server.



If the administrator save important data not in the complete system authentifikasi folder, then most likely be reached by the google search engine. If data is successfully steal in by the unauthorized person, then the will be in misuse.

Here, some google search syntax to crawl the password:

1.
"Login: *" "password =*" filetype: xls (searching data command to the system files that are stored in Microsoft Excel)

2.
allinurl: auth_user_file.txt (to find files auth_user_file.txt containing password on server).

3. filetype: xls inurl: "password.xls" (looking for username and password in ms excel format). This command can change with admin.xls)

4.
intitle: login password (get link to the login page with the login words on the title and password words anywhere. If you want to the query index more pages, type allintitle)

5. intitle: "Index of" master.passwd (index the master password page)

6. index of / backup (will search the index backup file on server)

7. intitle: index.of people.lst (will find web pages that contain user list).

8. intitle: index.of passwd.bak ( will search the index backup password files)

9. intitle: "Index of" pwd.db (searching database password files).

10. intitle: "Index of .. etc" passwd (this command will index the password sequence page).

11. index.of passlist.txt (will load the page containing password list in the clear text format).

12. index.of.secret (google will bring on the page contains confidential document). This syntax also changed with government query site: gov to search for government secret files, including password data) or use syntax: index.of.private

13. filetype: xls username password email (will find spreadsheets filese containing a list of username and password).

14. "# PhpMyAdmin MySQL-Dump" filetype: txt (will index the page containing sensitive data administration that build with php)

15. inurl: ipsec.secrets-history-bugs (contains confidential data that have only by the super user). or order with inurl: ipsec.secrets "holds shared secrets"

16. inurl: ipsec.conf-intitle: manpage (useful to find files containing important data for hacking)

17. inurl: "wvdial.conf" intext: "password" (display the dialup connection that contain phone number, username and password)

18. inurl: "user.xls" intext: "password" (showing url that save username and passwords in spread sheet files)

19. filetype: ldb admin (web server will look for the store password in a database that dos not delete by googledork)

20.inurl: search / admin.php (will look for php web page for admin login). If you are lucky, you will find admin configuration page to create a new user.

21.
inurl: password.log filetype:log (this keyword is to search for log files in a specific url)

22. filetype: reg HKEY_CURRENT_USER username (this keyword used to look for reg files (registyry) to the path HCU (Hkey_Current_User))


In fact, there are many more commands that google can crawl in use in the password. One who has the ability google reveals in this case is http://johnny.ihackstuff.com. For that, visit the web to add insight about the google ability.

Here, some of the other syntax google that we need to look for confidential data :

"Http://username: password @ www ..." filetype: bak inurl: "htaccess | passwd | shadow | ht users"
(this command is to take the user names and passwords for backup files)

filetype:mdb inurl:”account|users|admin|administrators|passwd|password” mdb files (this command is to take the password information)

filetype:ini ws_ftp pwd (searching admin password with ws_ftp.ini file)

intitle: "Index of" pwd.db (searching the encrypted usernames and passwords)

inurl:admin inurl:backup intitle:index.of (searching directories whose names contain the words admin and backup)

“Index of/” “Parent Directory” “WS _ FTP.ini” filetype:ini WS _ FTP PWD (WS_FTP configuration files is to take FTP server access passwords)

ext:pwd inurl:(service|authors|administrators|users) “# -FrontPage-” (there is Microsoft FrontPage passwords)

filetype: sql ( "passwd values ****" |" password values ****" | "pass values ****")searching a SQL code and passwords stored in the database)

intitle:index.of trillian.ini (configuration files for the Trillian IM)

eggdrop filetype:user (user configuration files for the Eggdrop ircbot)

filetype:conf slapd.conf (configuration files for OpenLDAP)

inurl:”wvdial.conf” intext:”password” (configuration files for WV Dial)

ext:ini eudora.ini (configuration files for the Eudora mail client)

filetype: mdb inurl: users.mdb (potentially to take user account information with Microsoft Access files)

intext:”powered by Web Wiz Journal” (websites using Web Wiz Journal, which in its standard configuration allows access to the passwords file – just enter http:///journal/journal.mdb instead of the default http:///journal/)

“Powered by DUclassified” -site:duware.com "Powered by DUclassified"-site: duware.com
“Powered by DUcalendar” -site:duware.com "Powered by DUcalendar"-site: duware.com
“Powered by DUdirectory” -site:duware.com "Powered by DUdirectory"-site: duware.com
“Powered by DUclassmate” -site:duware.com "Powered by DUclassmate"-site: duware.com
“Powered by DUdownload” -site:duware.com "Powered by DUdownload"-site: duware.com
“Powered by DUpaypal” -site:duware.com "Powered by DUpaypal"-site: duware.com
“Powered by DUforum” -site:duware.com "Powered by DUforum"-site: duware.com


intitle:dupics inurl:(add.asp | default.asp |view.asp | voting.asp) -site:duware.com(websites that use DUclassified, DUcalendar, DUdirectory, DUclassmate, DUdownload, DUpaypal, DUforum or DUpics applications, by default allows us to retrieve passwords file)

To DUclassified, just visit http:///duClassified/ _private / duclassified.mdb
or http:///duClassified/ or http:///duClassified/

intext: "BiTBOARD v2.0" "BiTSHiFTERS Bulletin Board" (Bitboard2 use the website bulletin board, the default settings make it possible to retrieve the passwords files to be obtained with the ways http:///forum/admin/data _ passwd.dat
or http:///forum/forum.php) or http:///forum/forum.php)

Searching for specific documents :

filetype: xls inurl: "email.xls" (potentially to take the information contact)

“phone * * *” “address *” “e-mail” intitle:”curriculum vitae”
CVs "not for distribution"
(confidential documents containing the confidential clause
buddylist.blt)

AIM contacts list AIM contacts list

intitle:index.of mystuff.xml intitle: index.of mystuff.xml

Trillian IM contacts list Trillian IM contacts list

filetype:ctt “msn” filetype: Note "msn"

MSN contacts list MSN contacts list

filetype:QDF
(QDF database files for the Quicken financial application)

intitle: index.of finances.xls (finances.xls files, potentially to take information on bank accounts, financial Summaries and credit card numbers)

intitle: "Index Of"-inurl: maillog (potentially to retrieve e-mail account)


enjoy hacking[ankush]

ANKUSH
On increasing demand hear is the steps

1. Open the Reliance Netconnect Interface and Click Settings [ Make sure you are connected to internet through reliance netconnect, or else you would need to disconnect when you change the settings ]

2.Now click Network in the left pane, now you might have Hybrid Connection selected in the network type, select the Broadband+ as network type and click apply and now connect to internet.

3.Reason To Change the Network Type - By default Hybrid mode is available in indian cities which includes metro cities in some selected areas, if the signals fall in their strength the connection would still be alive and will switch to the lower speed mode of 1x which gives 144 kbps. It will also result in frequent disconnection.

On the other hand if you switch to broadband+ connection type , it seems to be a stable network type in which you may experience better speed and will not experience frequent disconnections.


enjoy hacking [ankush]